PRIMER and PRIMER H : Epoxy primers for adhesion on concrete substrates

Presentation

Primer and Primer H are two epoxy-based products that come in the form of two factory pre-dosed components: a resin part and a hardener part.

In order to ensure good adhesion between the substrate and the tile or resin flooring, the use of a bonding primer is essential. To further strengthen the bond, sand the primer with HN0.6-1.6 sand.

The most commonly used primer is FB67. It can be applied directly on dry, previously prepared concrete. However, in case the conditions on site do not allow to obtain a dry concrete, it is possible to apply a special primer for wet concrete substrate, the H primer.

Packaging

	KIT PRIMER FB67	SALES UNIT
	1 Pc Resin FB67	Per box of 10.80 kg with : 3 Pcs Resins + 3 Pcs Hardeners
	1 Pc Hardener FB67	Per box of 10.80 kg with : 3 Pcs Resins + 3 Pcs Hardeners

	KIT PRIMER H	SALES UNIT
	1 Pc Resin FB67	Per box of 9.20 kg with : 2 Pcs Resins + 2 Pcs Hardeners
	1 Pc Hardener H	Per box of 9.20 kg with : 2 Pcs Resins + 2 Pcs Hardeners

	+ SAND (OPTIONAL)	SALES UNIT
	Sand HN 0.6-1.6 or S32 For the dosage of this component, please refer to the technical data sheet	Per bag of 25 kg

Color: TRANSPARENT

PRIMER FB67 AND PRIMER H

informations-niveau-d-emission-de-substances-volatiles-1-Hoganas

informations-niveau-d-emission-de-substances-volatiles-2-Hoganas

informations-niveau-d-emission-de-substances-volatiles-3-Hoganas

* Information on the level of emissions of volatile substances in indoor air, presenting a risk of inhalation toxicity, on a class scale from A+ (very low emissions) to C (high emissions).

Other products for floor preparation

Epoxy resurfacing

Waterproof layer FB70

For more information on our products, consult our Technical data sheets.