A complete range of antiacid adhesive mortar for the realization of industrial flooring :
Primers, adhesive mortar and flexible waterproof layer.

PRIMER and PRIMER H

Adhesion layer

To ensure a good adhesion between the substrate and the ceramic flooring, the use of an adhesion layer is essential.

Primer and primer H are two products based on epoxy resin. They are composed of two proportioned components: a resin part and a hardener part.

The first primer is the most usually used. It’s directly laid over a dry concrete. Nevertheless, in case the conditions on the construction site do not allow  to obtain a dry concrete, it’s possible to apply a special primer for wet floor: primer H.

Packaging

Kit Primer  Resin + Hardener

 3.6 kg (sold in boxes of 3×3.6 = 10.80 kg)

Kit Primer H  Resin + Hardener 4.6 kg (sold in boxes of 2×4.6 = 9.2 kg)

FB 67

Antiacid adhesive mortar

FB-67FB 67 adhesive mortar is based on epoxy resin. It’s composed of three proportioned components : one part resin, one part hardener and one part filler.

FB67 adhesive mortar is used for the setting of tiles on the floor. FB67 is water resistant but, because of its inflexibility, it can’t replace a flexible waterproof layer, as FB70, in a construction.

FB 67 is recommended for floor exposed to mechanical and chemical attack. So, FB67 is adapting for a lot of industries like food industries, chemical industries, pharmaceutical industries, …..

Packaging

Kit
 Resin + Hardener + Filler
 17.6 kg

FB 70

Flexible waterproof and acid resistant layer for floor

FB-70FB 70 is a flexible mortar, based on polyurethane. It’s composed of proportioned components : one part resin and one part hardener.

FB 70 is used to make a water and acid proof layer between the concrete and the ceramic flooring.  Because of its flexibility, FB70 absorb the shear strength between the concrete and the flooring, caused by structure movement or of thermal dilatation.

FB 70 is recommended for upper floor premises, submit to chemical attack, ….

Packaging

Kit Resin + Hardener   20 kg

FB 43

Flexible waterproof and acid resistant layer for wall

FB 43 is also a flexible adhesive mortar based on polyurethane. It’s composed of proportioned components: one part resin and one part hardener.

Contrary to FB70, FB43 is specially design for setting tiles on wall or on high slope floor.

Packaging

Kit Resin + Hardener   5 kg

These products are only for professional and must be used by qualified people.

For more information on our products, contact us.

These products are only for professional and must be used by qualified people.

For more information on our products, contact us.

Menu
commodo nec suscipit ut dictum odio Curabitur ut elementum id,